introduction

The device is widely used in thin oil lubrication system and hydraulic transmission, reducer system, as for conveying lubricating oil or as the power source of the hydraulic system oil pump device, used for discharging and conveying non corrosive liquid lubrication medium, the suitable medium viscosity grade for N22-N460 of industrial lubrication of oil or hydraulic oil temperature is 50 DEG C plus or minus 5 degrees. This pump has the advantages of simple structure, reliable operation, convenient maintenance

Note: the need for explosion-proof motor and motor power, the order please specify.

Four, use and description

1, the pump for low-pressure hydraulic drive, 1-8 degrees e mineral oil viscosity for delivery, work in the oil liquid of the oil temperature of 10 DEG C to minus 50 DEG C for. Rotate speed of 150 rpm.

2, the oil pump should be close to the fuel tank, suction height should not exceed 500 mm.

3, the oil pump motor group should be firmly fixed and shall not loose phenomenon.

4, in order to ensure the normal operation of the pump, the transmission of internal and external elastic coupling, pump and motor center line I plant adjustment within 0.1 mm, not secretly dismantling.

5, in order to ensure the long term operation of oil pump, the pumping of oil must be clean, not due any corrosive substances and mechanical impurities, the pump suction port should set the oil filter, the flow is greater than three times the flow rate of the pump.

6, oil pump, the signs should be the direction of the arrow arrow, the pump basic form for the clockwise rotation, if the user is required to rotate the counter clockwise, please specify when ordering F ".

7, the overflow valve should be close to the pump as far as possible, preferably directly connected with the oil pump.